Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
- Engine
   2.1. Technical characteristics
   2.2. Greasing system
   2.3. Maintenance and engine repair
   2.4. Compression check
   2.5. Dismantle and engine installation assembled
   2.6. Engine support
   2.7. Inlet collector and laying
   2.8. Final collector and laying
   2.9. Cover of the case of a cam-shaft
   2.10. Pulley of a cranked shaft
   2.11. Forward cover of a gear belt
   2.12. Camshaft cogwheel
   2.13. Cogwheel of a cranked shaft
   2.14. Back cover of a gear belt
   2.15. Adjustment of a tension of a gear belt
   2.16. Verification of the angular provision of a camshaft
   2.17. Forward consolidation of a cranked shaft
   2.18. Camshaft. Levers. Hydrojacks of gaps
   2.19. Klapannye of a spring. Consolidations of cores of valves
   2.20. Head of cylinders. Camshaft case
   2.21. Repair of a head of the block of cylinders
   2.22. Dismantle of valves
   2.23. Directing plugs of valves
   2.24. Expansion of openings of plugs
   2.25. Valves
   2.26. Klapannye of a spring
   2.27. Saddles of valves
   2.28. Consolidations of valves
   2.29. Height of a core of the valve concerning a head of the block of cylinders
   + 2.30. Pushers of valves with hydrojacks of gaps
   2.31. Oil pallet
   2.32. A reception branch pipe with the oil filter
   2.33. Oil pump
   2.34. Repair of the oil pump
   2.35. Pistons and rods
   2.36. Flywheel. Back consolidation of a cranked shaft
   2.37. Cranked shaft
   2.38. Rods and radical bearings
   2.39. Replacement of loose leaves
   2.40. Piston group and rods
   2.41. Piston fingers and rings
   2.42. Block of cylinders
   2.43. Installation of pistons
   2.44. Disk balancing with a gear wreath
   2.45. Repair of carving openings
   + 2.46. Diagnostics of malfunctions of the engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

2.6. Engine support

GENERAL INFORMATION

Prevention

In order to avoid a travmirovaniye it is necessary to watch closely correctness of installation and reliability of fastening of the engine to technological a traverse, established over a motor compartment.

Engine assembled. Engine support

201. ARM OF THE BACK SUPPORT
202. BOLT of the BACK SUPPORT (MOMENT of the INHALING of 65 Nanometers)
203. BACK SUPPORT
204. WASHER
205. NUT
206. WASHER
207. BOLT (MOMENT of the INHALING of 25 Nanometers)
208. LEFT FORWARD SUPPORT
209. WASHER
210. BOLT (MOMENT of the INHALING of 75 Nanometers)

211. ARM OF THE LEFT FORWARD SUPPORT
212. BOLT (MOMENT of the INHALING of 60 Nanometers)
213. BOLT (MOMENT of the INHALING of 60 Nanometers)
214. ARM OF THE RIGHT FORWARD SUPPORT
215. BOLT (MOMENT of the INHALING of 65 Nanometers)
216. RIGHT FORWARD SUPPORT
217. HOLDER OF THE RIGHT FORWARD SUPPORT
218. WASHER
219. NUT (MOMENT of the INHALING of 40 Nanometers)

Traverse for engine fastening

Forward left support of the engine

208. LEFT FORWARD SUPPORT
211. ARM OF THE LEFT FORWARD SUPPORT
212. The BOLT of FASTENING of the ARM TO the TRANSMISSION CASE (the MOMENT of the INHALING of 60 Nanometers)
213. The BOLT of FASTENING of the ARM TO the SUPPORT (the MOMENT of the INHALING of 60 Nanometers)

Back support of the engine

202. BOLT of the BACK SUPPORT (MOMENT of the INHALING of 65 Nanometers)
203. BACK SUPPORT
204. WASHER
205. NUT
206. WASHER
207. BOLT (MOMENT of the INHALING of 25 Nanometers)

To check

PERFORMANCE ORDER

1. To raise the Engine, to unload rubber pillows of support.

2. A surface of rubber pillows on existence of cracks because of an overheat.

3. Backlog of rubber pillows from plates.

4. Existence of cracks and ruptures of rubber in the middle of pillows.

5. Weakening of an inhaling of bolts and nuts.

To remove or disconnect

PERFORMANCE ORDER

1. Negative wire of the storage battery.

2. To suspend the Engine on a traverse.

3. Bolt 213 right forward support.

4. Bolts 215 right forward support.

5. Nuts 219 and washers 218 right forward support.

6. Bolts 213 left forward support.

7. Bolts 212 left forward support.

8. Bolts 210 and washers 209 left forward support.

9. Nut 205, bolt 202, washer 204 and arm of a back support.

10. Bolts 207, washers 206 and a back support of the engine from the car.

To establish or attach

PERFORMANCE ORDER

1. Bolt 202, washer 204, nut 205 back support.

2. Bolts 207, washers 206.

3. To attach an arm of a forward left support bolts 212 (the moment of an inhaling of 60 Nanometers).

4. To attach an arm 211 bolts 213 (the moment of an inhaling of 60 Nanometers).

5. Bolts 210 with washers 209.

6. Bolt 213 right forward support.

7. Bolts of the 215th fastening of an arm of the right forward support.

8. Nuts 219 and washers 218.

9. To remove to a traverse.

10. To tighten bolts and nuts the demanded moment, adhering to sequence: bolts 202, 207, 210, nut 219.

11. Negative wire of the storage battery.