Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
   17.2. General description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Air removal from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (forward)
   17.9. Brake hoses (back)
   + 17.10. Parking brake
   17.11. Check of a condition of forward brake slips
   17.12. Check of a condition of back brake slips
   17.13. Brake disks
   17.14. Brake drums
   17.15. Brake pedal
   17.16. Main brake cylinder
   17.17. Tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. Main brake cylinder assembled
   17.20. Repair of the main brake cylinder
   17.21. Disk brake mechanism
   17.22. Blocks and slips
   17.23. Protective cover of the piston
   17.24. Brake disk
   17.25. Support
   17.26. Guard
   17.27. Support repair
   17.28. Drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of the parking brake
   17.31. Basic brake disk
   17.32. Wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. Vacuum amplifier of brakes
   + 17.35. Anti-blocking system of brakes
   17.36. Air removal from a brake hydraulic drive
   17.37. Air removal from a brake hydraulic drive manually
   17.38. The valve for air removal from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. Electronic control unit braking
   17.42. Sensor of angular speed of a forward wheel
   17.43. Flexible conducting of DUS of a forward wheel
   17.44. Sensor of angular speed of a back wheel
   + 17.45. Flexible conducting of DUS of a back wheel
   17.46. System electric safety lock
   17.47. ABS relay
   17.48. Signaling devices
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



Brake system

17. Brake system

17.1. Technical characteristics

GENERAL INFORMATION

Brake drum

Internal diameter
198,6 mm
Admissible ovality
0,1 mm
The maximum diameter when boring
201,0 mm

Brake disk

External diameter
236,0 mm
Admissible face palpation
0,1 mm
Admissible raznotolshchinnost
0,01 mm
Nominal thickness
12,7 mm
The minimum admissible thickness after grinding
10,7 мм*
Minimum admissible thickness
9,7 mm

* At achievement of the specified size of a disk only single installation of new brake shoes is allowed. Then the disk is subject to replacement.

Main brake cylinder

Nominal diameter of the cylinder
22,20 mm
Maximum admissible diameter of the cylinder
22,27 mm

Wheel brake cylinder

Nominal diameter of the cylinder
17,46 mm
Maximum admissible diameter of the cylinder
17,53 mm
Minimum admissible diameter of the piston
17,39 mm

Moments of an inhaling of carving connections

Bolt of fastening of flexible conducting of DUS of a back wheel
5,4 Nanometers
Bolt of fastening of DUS of a back wheel
7,8 Nanometers
Bolt of fastening of DUS of a forward wheel
7,8 Nanometers
Bolt of fastening of the wheel cylinder
9 Nanometers
Bolt of fastening of a tip of a brake hose to a bracket
25 Nanometers
Bolt of fastening of a tip of a brake hose
25 Nanometers
Bolt of fastening of the ABS relay
8 Nanometers
Bolt of an arm of a brake bracket
80 Nanometers
Bolt of the lever of the parking brake
25 Nanometers
Bolts (with a type head Togkh) fastenings of the block of electric motors
4,5 Nanometers
Bolts of fastening of the block of modulators
5,4 Nanometers
Bolts of fastening of a brake basic disk
28 Nanometers
Bolts with type heads Togkh of EMK fastening
4,5 Nanometers
Bolts of a guard of the disk brake mechanism
4 Nanometers
The screw of fastening of a brake drum to a nave flange
4 Nanometers
The screw of fastening of a brake disk to a nave flange
4 Nanometers
Nut of fastening of a vacuum hose to the inlet pipeline of the engine
5 Nanometers
Nut of fastening of a vacuum hose to the inlet pipeline of the engine
15 Nanometers
Nut of fastening of an axis of a brake pedal
18 Nanometers
Nuts of fastening of the main brake cylinder
18 Nanometers
Nuts of fastening of the main brake cylinder to the amplifier
18 Nanometers
Nuts of fastening of an arm of a pedal to the forward panel
20 Nanometers
Nuts of fastening of an arm with the amplifier to the forward panel of the Body
22 Nanometers
Nuts of fastening of a cover of TEBU
6 Nanometers
Nuts of fastening of TEBU
4 Nanometers
Nuts of fastening of the amplifier to an arm
22 Nanometers
Nuts of fastening of gear wheels of modulators
8,5 Nanometers
Valve of production of air
9 Nanometers
Valves for air removal from a hydraulic actuator (on supports and wheel cylinders)
9 Nanometers
Plug of fastening of a negative wire of the battery
15 Nanometers
Fixing bolts of a support
95 Nanometers
Fixing bolts of a support of the disk brake mechanism
95 Nanometers
Seat fastening
20 Nanometers
Hollow bolt of fastening of a tip of a brake hose to a support of a disk brake
25 Nanometers
Hollow bolt of a support of a disk brake
25 Nanometers
Proportional valve
20-25 Nanometers
Connections of brake pipelines
16 Nanometers
Special bolts of fastening of the proportional valve
24 Nanometers
Coupling bolts of a support
95 Nanometers
Coupling bolts of a brake support
95 Nanometers
Shtutsernye of a nut of fastening of brake pipelines
15 Nanometers
Unions of pipelines
16 Nanometers