Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
   17.2. General description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Air removal from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (forward)
   17.9. Brake hoses (back)
   + 17.10. Parking brake
   17.11. Check of a condition of forward brake slips
   17.12. Check of a condition of back brake slips
   17.13. Brake disks
   17.14. Brake drums
   17.15. Brake pedal
   17.16. Main brake cylinder
   17.17. Tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. Main brake cylinder assembled
   17.20. Repair of the main brake cylinder
   17.21. Disk brake mechanism
   17.22. Blocks and slips
   17.23. Protective cover of the piston
   17.24. Brake disk
   17.25. Support
   17.26. Guard
   17.27. Support repair
   17.28. Drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of the parking brake
   17.31. Basic brake disk
   17.32. Wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. Vacuum amplifier of brakes
   + 17.35. Anti-blocking system of brakes
   17.36. Air removal from a brake hydraulic drive
   17.37. Air removal from a brake hydraulic drive manually
   17.38. The valve for air removal from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. Electronic control unit braking
   17.42. Sensor of angular speed of a forward wheel
   17.43. Flexible conducting of DUS of a forward wheel
   17.44. Sensor of angular speed of a back wheel
   + 17.45. Flexible conducting of DUS of a back wheel
   17.46. System electric safety lock
   17.47. ABS relay
   17.48. Signaling devices
+ Body
+ Heating, ventilation
+ Electric equipment

With Soap2day, you can enjoy unlimited streaming without restrictions.

17.40. The block of hydraulic modulators with electric motors

To remove or disconnect

Detachment of the socket of electroconducting of EMK of the modulator

515. THE VALVE FOR AIR REMOVAL FROM THE BLOCK OF MODULATORS
516. THE BLOCK OF MODULATORS ASSEMBLED WITH ELECTRIC MOTORS
560. HOSE OF THE BROAD TANK

Hose detachment from a broad tank

560. HOSE OF THE BROAD TANK
551. THE HOSE OF THE MODULATION OF COOLING LIQUID
552. BROAD TANK

Detachment of the electric socket of the block of electric motors

516. THE BLOCK OF MODULATORS ASSEMBLED WITH ELECTRIC MOTORS
518. ELECTRIC SOCKET OF THE BLOCK OF ELECTRIC MOTORS

Detachment of pipelines from the block of modulators

516. THE BLOCK OF MODULATORS ASSEMBLED WITH ELECTRIC MOTORS
520А. PIPELINES OF THE BLOCK OF MODULATORS (FROM THE MAIN BRAKE CYLINDER)

Dismantle of the block of modulators assembled with electric motors

516. THE BLOCK OF MODULATORS ASSEMBLED WITH ELECTRIC MOTORS

PERFORMANCE ORDER

1. By means of the SCANNER-11 device to remove a tightness of gear wheels of a drive of pistons of modulators.

2. Negative wire of the storage battery.

3. To reduce pressure in a broad tank, having carefully uncovered a tank after cooling of the engine and cooling liquid.

4. A collar and a hose from a broad tank, fig. A hose detachment from a broad tank.

5. EMK electric sockets and block of electric motors, fig. Detachment of the socket of electroconducting of EMK of the modulator, fig. Detachment of the electric socket of the block of electric motors. To enclose rags under pipelines of the block of modulators for protection of electric sockets against hit of brake liquid.

6. Six brake pipelines from the block of modulators, fig. A detachment of pipelines from the block of modulators. To muffle openings of pipelines in order to avoid pollution and losses of brake liquid.

7. To unscrew three nuts, to remove a "mass" wire and to dismantle from the car the block of modulators assembled with electric motors, fig. Dismantle of the block of modulators assembled with electric motors.

To establish or attach

PERFORMANCE ORDER

1. The block of modulators assembled with electric motors and a "mass" wire to screw three nuts. To tighten nuts of fastening of the block of modulators the moment of 5,4 Nanometers. To remove caps from openings of brake pipelines and unions of the block of modulators. To attach pipelines to unions and to fix nuts. To tighten shtutserny nuts of fastening of brake pipelines the moment of 15 Nanometers.

2. EMK electric sockets and block of electric motors.

3. A hose to a broad tank. To fix a collar.

4. Negative wire of the storage battery.

5. To remove air from a brake hydraulic actuator.

6. To check level of cooling liquid. If necessary to add a mix of etilenglikolevy antifreeze and water in a proportion 1:1. To finish level of cooling liquid to norm.