since 1994 of release
Repair and car operation
+ Maintenance instruction
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
17.2. General description
17.3. Check of a technical condition of brake system
17.4. Filling of a tank of the main brake cylinder
17.5. Air removal from brake system
17.6. Washing of brake system
17.7. Check of a regulator of brake forces
17.8. Brake hoses (forward)
17.9. Brake hoses (back)
+ 17.10. Parking brake
17.11. Check of a condition of forward brake slips
17.12. Check of a condition of back brake slips
17.13. Brake disks
17.14. Brake drums
17.15. Brake pedal
17.16. Main brake cylinder
17.18. Regulators of brake forces (proportional valves)
17.19. Main brake cylinder assembled
17.20. Repair of the main brake cylinder
17.21. Disk brake mechanism
17.22. Blocks and slips
17.23. Protective cover of the piston
17.24. Brake disk
17.27. Support repair
17.28. Drum-type brake mechanism
17.29. Adjustment of the brake mechanism
17.30. Adjustment of the parking brake
17.31. Basic brake disk
17.32. Wheel cylinder
17.33. Repair of the wheel cylinder
17.34. Vacuum amplifier of brakes
+ 17.35. Anti-blocking system of brakes
17.36. Air removal from a brake hydraulic drive
17.37. Air removal from a brake hydraulic drive manually
17.38. The valve for air removal from the block of modulators
17.39. Electromagnetic valves of modulators
17.40. The block of hydraulic modulators with electric motors
17.41. Electronic control unit braking
17.42. Sensor of angular speed of a forward wheel
17.43. Flexible conducting of DUS of a forward wheel
17.44. Sensor of angular speed of a back wheel
+ 17.45. Flexible conducting of DUS of a back wheel
17.46. System electric safety lock
17.47. ABS relay
17.48. Signaling devices
+ Heating, ventilation
+ Electric equipment
Секундомер соппр тут.
Disk brake mechanism
In a mobile bracket of a disk brake one opening for placement of the piston of the wheel cylinder is executed. The bracket is fixed on an arm of a telescopic rack of a forward suspension bracket. The floating bracket has possibility small axial moving along two directing. The pressure of liquid developed in brake system by pressing a brake pedal, will be transformed by the bracket mechanism owing to pressing of brake shoes to vrashchayushche муся to a disk. Pressure of working liquid affects at the same time the piston of the wheel cylinder and on the case of a floating bracket. When braking the piston and a bracket move towards to each other, providing synchronous pressing of brake shoes to a disk and car delay.
At repair of a bracket of a disk brake it is necessary to replace all details entering into a repair kit.
For simplification of installation to grease rubber details with fresh brake liquid.
It is forbidden to blow and dry details of a brake hydraulic actuator the compressed air from an industrial network as oil containing in compressed air will put out of action rubber consolidations.
At dismantle or a detachment of pipelines and knots of a hydraulic actuator it is necessary to remove after assembly air from all system or separate contours.
To replace brake shoes follows completely.
The given moments of an inhaling of carving connections are given for dry fixing details without lubricant.
All repair work is necessary for making on a pure workbench. It is necessary to accept precautionary measures for an exception of possibility of hit on a detail of a hydraulic actuator of mineral oils.