Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
   17.2. General description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Air removal from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (forward)
   17.9. Brake hoses (back)
   + 17.10. Parking brake
   17.11. Check of a condition of forward brake slips
   17.12. Check of a condition of back brake slips
   17.13. Brake disks
   17.14. Brake drums
   17.15. Brake pedal
   17.16. Main brake cylinder
   17.17. Tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. Main brake cylinder assembled
   17.20. Repair of the main brake cylinder
   17.21. Disk brake mechanism
   17.22. Blocks and slips
   17.23. Protective cover of the piston
   17.24. Brake disk
   17.25. Support
   17.26. Guard
   17.27. Support repair
   17.28. Drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of the parking brake
   17.31. Basic brake disk
   17.32. Wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. Vacuum amplifier of brakes
   + 17.35. Anti-blocking system of brakes
   17.36. Air removal from a brake hydraulic drive
   17.37. Air removal from a brake hydraulic drive manually
   17.38. The valve for air removal from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. Electronic control unit braking
   17.42. Sensor of angular speed of a forward wheel
   17.43. Flexible conducting of DUS of a forward wheel
   17.44. Sensor of angular speed of a back wheel
   + 17.45. Flexible conducting of DUS of a back wheel
   17.46. System electric safety lock
   17.47. ABS relay
   17.48. Signaling devices
+ Body
+ Heating, ventilation
+ Electric equipment

17.15. Brake pedal

GENERAL INFORMATION

Suspension bracket of a brake pedal

301. ARM
302. ARM OF THE SUSPENSION BRACKET OF THE PEDAL
303. SPRING CLAMP
304. NUT
305. WASHER
306. AXIS
307. RETURNABLE SPRING
308. PEDAL
309. OVERLAY OF THE PEDAL

To remove or disconnect

PERFORMANCE ORDER

1. Switch stoplight.

2. Returnable spring 307.

3. Fork and pusher finger.

4. A spring clamp 303 from an axis of 306 pedals.

5. Nut 304 and washer 305. To take out an axis 306 to the left.

6. Brake pedal 308. To notice an arrangement of a returnable spring.

To establish or attach

PERFORMANCE ORDER

1. A slip 309 on a new pedal.

2. Brake pedal 308. To establish a returnable spring in initial situation.

3. Axis of 306 pedals. To insert on the left side. Before installation to grease an axis.

4. A nut 304 and a washer 305 on an axis 306. To tighten a nut the 304th moment of 18 Nanometers.

5. A pusher fork to insert a finger.

6. A spring clamp 303 on an axis 306.

7. Stoplight switch.