Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
   17.2. General description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Air removal from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (forward)
   17.9. Brake hoses (back)
   + 17.10. Parking brake
   17.11. Check of a condition of forward brake slips
   17.12. Check of a condition of back brake slips
   17.13. Brake disks
   17.14. Brake drums
   17.15. Brake pedal
   17.16. Main brake cylinder
   17.17. Tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. Main brake cylinder assembled
   17.20. Repair of the main brake cylinder
   17.21. Disk brake mechanism
   17.22. Blocks and slips
   17.23. Protective cover of the piston
   17.24. Brake disk
   17.25. Support
   17.26. Guard
   17.27. Support repair
   17.28. Drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of the parking brake
   17.31. Basic brake disk
   17.32. Wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. Vacuum amplifier of brakes
   + 17.35. Anti-blocking system of brakes
   17.36. Air removal from a brake hydraulic drive
   17.37. Air removal from a brake hydraulic drive manually
   17.38. The valve for air removal from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. Electronic control unit braking
   17.42. Sensor of angular speed of a forward wheel
   17.43. Flexible conducting of DUS of a forward wheel
   17.44. Sensor of angular speed of a back wheel
   + 17.45. Flexible conducting of DUS of a back wheel
   17.46. System electric safety lock
   17.47. ABS relay
   17.48. Signaling devices
+ Body
+ Heating, ventilation
+ Electric equipment

17.31. Basic brake disk

GENERAL INFORMATION

Regulator

101. CARVING CORE
102. NUT
103. CLIP
104. HOLLOW CORE

To remove or disconnect

PERFORMANCE ORDER

1. To lift and fix properly the car.

2. Details of the brake mechanism.

3. Nave of a back wheel.

4. Holder of a cable of the parking brake.

5. The brake pipeline from the wheel cylinder. To muffle a pipeline opening for an exception of losses of brake liquid and dirt hit.

6. The wheel cylinder from a basic brake disk.

7. Basic brake disk 4.

To establish or attach

Prevention

Before installation of brake shoes to impose a thin layer of plastic greasing on places of contact of blocks with a basic disk. Completely to screw a nut 102 on a core of 101 regulators. To collect a regulator 14 and to establish it between brake and blocks. To check correctness of provision of a regulator. The nut 102 should not be jammed on a core carving (see fig. Regulator).

PERFORMANCE ORDER

1. Cardboard laying on a new basic disk.

2. A basic disk 4 on the suspension bracket lever. To tighten bolts of fastening of a basic disk to a flange of the lever of a suspension bracket the moment of 28 Nanometers.

3. The wheel cylinder on a basic disk. To tighten a bolt of fastening of the wheel cylinder to a basic disk the moment of 9 Nanometers.

4. The brake pipeline to the wheel cylinder. To tighten pipeline fastening by the moment of 16 Nanometers.

5. A cable of the parking brake in the holder.

6. Nave of a back wheel.

7. Details of the brake mechanism.

8. To remove air from a brake hydraulic actuator.