Daewoo Nexia
since 1994 of release
Repair and car operation
Deu Neksiya
+
Maintenance instruction
+
Maintenance
+
Engine
+
3. Engine (two top camshafts)
+
cooling System
+
Toplevnaya and exhaust systems
+
Electric chain
+
7. Ignition system
+
8. Electronic control unit and sensors
+
Transmission
+
10. Five-speed transmission and main RPO MM5 broadcast
+
11. Automatic Transmission
+
Steering
+
Running gear
+
14. Forward suspension bracket
+
15. Drive of forward wheels
+
16. Back suspension bracket
-
Brake system
17.2. General description
17.3. Check of a technical condition of brake system
17.4. Filling of a tank of the main brake cylinder
17.5. Air removal from brake system
17.6. Washing of brake system
17.7. Check of a regulator of brake forces
17.8. Brake hoses (forward)
17.9. Brake hoses (back)
+
17.10. Parking brake
17.11. Check of a condition of forward brake slips
17.12. Check of a condition of back brake slips
17.13. Brake disks
17.14. Brake drums
17.15. Brake pedal
17.16. Main brake cylinder
17.17. Tank
17.18. Regulators of brake forces (proportional valves)
17.19. Main brake cylinder assembled
17.20. Repair of the main brake cylinder
17.21. Disk brake mechanism
17.22. Blocks and slips
17.23. Protective cover of the piston
17.24. Brake disk
17.25. Support
17.26. Guard
17.27. Support repair
17.28. Drum-type brake mechanism
17.29. Adjustment of the brake mechanism
17.30. Adjustment of the parking brake
17.31. Basic brake disk
17.32. Wheel cylinder
17.33. Repair of the wheel cylinder
17.34. Vacuum amplifier of brakes
+
17.35. Anti-blocking system of brakes
17.36. Air removal from a brake hydraulic drive
17.37. Air removal from a brake hydraulic drive manually
17.38. The valve for air removal from the block of modulators
17.39. Electromagnetic valves of modulators
17.40. The block of hydraulic modulators with electric motors
17.41. Electronic control unit braking
17.42. Sensor of angular speed of a forward wheel
17.43. Flexible conducting of DUS of a forward wheel
17.44. Sensor of angular speed of a back wheel
+
17.45. Flexible conducting of DUS of a back wheel
17.46. System electric safety lock
17.47. ABS relay
17.48. Signaling devices
+
Body
+
Heating, ventilation
+
Electric equipment
17.26. Guard
To remove or disconnect
Guard dismantle
AND. SCISSORS
11. GUARD
12. NAVE
PERFORMANCE ORDER
1.
Brake support.
2.
Lock screw 17 and disk 13.
3.
Screws 18 of fastening of a guard through openings in a nave.
4.
To develop a guard 11 so that it was possible to scissor a narrow crossing point round an opening.
5.
To deduce a guard through a nave flange.
To establish or attach
Preparation of a new guard for installation
AND. SCISSORS
CENTURY. A CROSSING POINT ROUND THE GUARD OPENING
11. NEW GUARD
PERFORMANCE ORDER
1.
Before installation of a new guard to cut through a narrow crossing point round an opening. To remove agnails and to paint over a cut.
2.
To pass a guard a cut through a flange of a nave and to fix screws to an arm of a rack of a forward suspension bracket.
3.
Disk 13 and lock screw 17.
4.
Brake support.
