Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
   17.2. General description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Air removal from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (forward)
   17.9. Brake hoses (back)
   + 17.10. Parking brake
   17.11. Check of a condition of forward brake slips
   17.12. Check of a condition of back brake slips
   17.13. Brake disks
   17.14. Brake drums
   17.15. Brake pedal
   17.16. Main brake cylinder
   17.17. Tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. Main brake cylinder assembled
   17.20. Repair of the main brake cylinder
   17.21. Disk brake mechanism
   17.22. Blocks and slips
   17.23. Protective cover of the piston
   17.24. Brake disk
   17.25. Support
   17.26. Guard
   17.27. Support repair
   17.28. Drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of the parking brake
   17.31. Basic brake disk
   17.32. Wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. Vacuum amplifier of brakes
   + 17.35. Anti-blocking system of brakes
   17.36. Air removal from a brake hydraulic drive
   17.37. Air removal from a brake hydraulic drive manually
   17.38. The valve for air removal from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. Electronic control unit braking
   17.42. Sensor of angular speed of a forward wheel
   17.43. Flexible conducting of DUS of a forward wheel
   17.44. Sensor of angular speed of a back wheel
   + 17.45. Flexible conducting of DUS of a back wheel
   17.46. System electric safety lock
   17.47. ABS relay
   17.48. Signaling devices
+ Body
+ Heating, ventilation
+ Electric equipment

8128da4b На сайте www.vorotastolicy.ru гаражные ворота купить.

17.13. Brake disks


To measure

1. It is necessary to measure thickness in four or more places on a disk circle. All measurements are carried out at identical distance from external edge of a disk.
2. If the thickness of a disk measured in various places differs more, than on 0,01 mm, when braking pulsations of effort on a brake pedal will be felt, and also vibration of a front of the car is possible. The worn-out disk, not satisfying to this requirement, it is necessary перешлифовать or to replace new.




1. To include a neutral in transmissions.
2. To lift the car.
3. To remove forward wheels. To mark the provision of wheels concerning naves.
4. To fix a brake disk on a nave two wheel bolts.
5. To establish on a brake bracket the measuring indicator.
6. To establish щуп the indicator at distance about 10 mm from external edge of a disk. Shchup should be perpendicular the planes of a disk and is pressed to a disk by small effort. Allowed face palpation of a disk no more than 0,1 mm. If face palpation exceeds admissible value, it is necessary to check purity and density of a prileganiye of the interfaced surfaces of a disk and a nave, and also absence задиров on a surface of a friction of a disk.
7. To remove the indicator.
8. To unscrew wheel bolts.
9. To establish forward wheels and to tighten fixing bolts the moment of 90 Nanometers.
10. To lower the car.