Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
   17.2. General description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Air removal from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (forward)
   17.9. Brake hoses (back)
   + 17.10. Parking brake
   17.11. Check of a condition of forward brake slips
   17.12. Check of a condition of back brake slips
   17.13. Brake disks
   17.14. Brake drums
   17.15. Brake pedal
   17.16. Main brake cylinder
   17.17. Tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. Main brake cylinder assembled
   17.20. Repair of the main brake cylinder
   17.21. Disk brake mechanism
   17.22. Blocks and slips
   17.23. Protective cover of the piston
   17.24. Brake disk
   17.25. Support
   17.26. Guard
   17.27. Support repair
   17.28. Drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of the parking brake
   17.31. Basic brake disk
   17.32. Wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. Vacuum amplifier of brakes
   + 17.35. Anti-blocking system of brakes
   17.36. Air removal from a brake hydraulic drive
   17.37. Air removal from a brake hydraulic drive manually
   17.38. The valve for air removal from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. Electronic control unit braking
   17.42. Sensor of angular speed of a forward wheel
   17.43. Flexible conducting of DUS of a forward wheel
   17.44. Sensor of angular speed of a back wheel
   + 17.45. Flexible conducting of DUS of a back wheel
   17.46. System electric safety lock
   17.47. ABS relay
   17.48. Signaling devices
+ Body
+ Heating, ventilation
+ Electric equipment

17.25. Support

To remove or disconnect

Dismantle of protective caps

AND. CHISEL

5. PROTECTIVE CAP OF THE HEAD OF THE BOLT

Dismantle of fixing bolts

AND. SIX-SIDED KEY

6. FIXING BOLTS

PERFORMANCE ORDER

1. To merge two thirds of brake liquid from a tank.

2. To lift the car.

3. To mark the provision of forward wheels concerning naves and to remove forward wheels.

4. To drown the piston 9 in the cylinder of a brake support and to provide gaps between overlays of blocks 2, 3 and a brake disk 13.

5. A bolt of fastening of the union of a brake hose, only in case of need dismantle from the bracket car for dismantling and repair. To muffle an opening in a support and a hose in order to avoid losses of brake liquid and hit in dirt system.

6. To weaken in easy blows of a hammer on a chisel landing of protective caps 5 and to remove caps by means of a screw-driver.

7. To turn out fixing bolts 6 and to remove a support. If the support is dismantled for servicing and repair of other details, to suspend a support on a wire hook, having fixed it on a telescopic rack of a forward suspension bracket. Bolts of fastening of a bracket on a rack of a suspension bracket have a special covering. To pass a tap of M 12х1,5 carving openings in an arm of a rack of a suspension bracket. Before installation to grease with a thin layer of fixing structure the new bolts which do not have a special covering.

To establish or attach

PERFORMANCE ORDER

1. A support on an arm of a telescopic rack of a suspension bracket to screw fixing bolts 6. To tighten fixing bolts the moment of 95 Nanometers.

2. The union of a brake hose to a support. To tighten a hollow bolt of fastening наконечни a hose the moment of 25 Nanometers.

3. Protective caps of 5 heads of bolts by means of the KM-404A adaptation.

Prevention

To use only new caps. Caps should sit down on the places exactly.

4. Wheels, observing initial situation and being guided on the made labels.

5. To lower the car.

6. To add in a tank fresh brake liquid and to finish its level to norm. To remove air from the support cylinder if the brake hose was disconnected. Repeatedly to check level of brake liquid in a tank.

7. Several times to press a brake pedal for data of blocks and establishment of normal gaps between blocks and a disk.

Prevention

The car troganiye while the brake pedal did not become "rigid" is forbidden.