Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
- Brake system
   17.2. General description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Air removal from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (forward)
   17.9. Brake hoses (back)
   + 17.10. Parking brake
   17.11. Check of a condition of forward brake slips
   17.12. Check of a condition of back brake slips
   17.13. Brake disks
   17.14. Brake drums
   17.15. Brake pedal
   17.16. Main brake cylinder
   17.17. Tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. Main brake cylinder assembled
   17.20. Repair of the main brake cylinder
   17.21. Disk brake mechanism
   17.22. Blocks and slips
   17.23. Protective cover of the piston
   17.24. Brake disk
   17.25. Support
   17.26. Guard
   17.27. Support repair
   17.28. Drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of the parking brake
   17.31. Basic brake disk
   17.32. Wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. Vacuum amplifier of brakes
   + 17.35. Anti-blocking system of brakes
   17.36. Air removal from a brake hydraulic drive
   17.37. Air removal from a brake hydraulic drive manually
   17.38. The valve for air removal from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. Electronic control unit braking
   17.42. Sensor of angular speed of a forward wheel
   17.43. Flexible conducting of DUS of a forward wheel
   17.44. Sensor of angular speed of a back wheel
   + 17.45. Flexible conducting of DUS of a back wheel
   17.46. System electric safety lock
   17.47. ABS relay
   17.48. Signaling devices
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



17.32. Wheel cylinder

GENERAL INFORMATION

Wheel cylinder

301. PROTECTIVE COVER
302. PISTON
303. CONSOLIDATION
304. RAZZHIMNY SPRING
305. VALVE CAP
306. THE VALVE FOR AIR REMOVAL
307. WHEEL CYLINDER

To remove or disconnect

PERFORMANCE ORDER
1. To lift and fix properly the car.
2. Back wheels.
3. To turn out the lock screw 10 tormozno го a drum.
4. Brake reel 9.
5. Top coupling spring 11. To notice the provision of a regulator 14, the press lever 16 and a spring 15. A few to take away outside a brake shoe 6.
6. To clear dirt from a surface of the wheel cylinder, the union of the pipeline, the valve for removal of air, a head of a bolt and the next details.
7. The brake pipeline from the wheel cylinder 307 (see fig. Wheel cylinder). To muffle a pipeline opening for an exception of losses of brake liquid of hit of dirt.
8. To turn out a bolt and to remove the wheel cylinder 307.

To establish or attach

PERFORMANCE ORDER
1. The wheel cylinder 307 on a basic disk 4 to screw a bolt. To tighten a bolt of fastening of the wheel cylinder the moment of 9 Nanometers.
2. The brake pipeline to the wheel cylinder. To tighten pipeline fastening by the moment of 16 Nanometers.
3. Back brake shoe 6.
4. Top coupling spring 11.
Prevention

To establish a regulator 14, press the lever 16 and a spring 15 in situation which they occupied before dismantling.


5. Lock screw 10 and brake reel 9.
6. Back wheels.
7. To remove air from all contours of a brake hydraulic actuator.
8. To adjust back brake mechanisms.
9. To adjust the parking brake.