Daewoo Nexia
since 1994 of release
Repair and car operation
Deu Neksiya
+
Maintenance instruction
+
Maintenance
-
Engine
2.1. Technical characteristics
2.2. Greasing system
2.3. Maintenance and engine repair
2.4. Compression check
2.5. Dismantle and engine installation assembled
2.6. Engine support
2.7. Inlet collector and laying
2.8. Final collector and laying
2.9. Cover of the case of a cam-shaft
2.10. Pulley of a cranked shaft
2.11. Forward cover of a gear belt
2.12. Camshaft cogwheel
2.13. Cogwheel of a cranked shaft
2.14. Back cover of a gear belt
2.15. Adjustment of a tension of a gear belt
2.16. Verification of the angular provision of a camshaft
2.17. Forward consolidation of a cranked shaft
2.18. Camshaft. Levers. Hydrojacks of gaps
2.19. Klapannye of a spring. Consolidations of cores of valves
2.20. Head of cylinders. Camshaft case
2.21. Repair of a head of the block of cylinders
2.22. Dismantle of valves
2.23. Directing plugs of valves
2.24. Expansion of openings of plugs
2.25. Valves
2.26. Klapannye of a spring
2.27. Saddles of valves
2.28. Consolidations of valves
2.29. Height of a core of the valve concerning a head of the block of cylinders
+
2.30. Pushers of valves with hydrojacks of gaps
2.31. Oil pallet
2.32. A reception branch pipe with the oil filter
2.33. Oil pump
2.34. Repair of the oil pump
2.35. Pistons and rods
2.36. Flywheel. Back consolidation of a cranked shaft
2.37. Cranked shaft
2.38. Rods and radical bearings
2.39. Replacement of loose leaves
2.40. Piston group and rods
2.41. Piston fingers and rings
2.42. Block of cylinders
2.43. Installation of pistons
2.44. Disk balancing with a gear wreath
2.45. Repair of carving openings
+
2.46. Diagnostics of malfunctions of the engine
+
3. Engine (two top camshafts)
+
cooling System
+
Toplevnaya and exhaust systems
+
Electric chain
+
7. Ignition system
+
8. Electronic control unit and sensors
+
Transmission
+
10. Five-speed transmission and main RPO MM5 broadcast
+
11. Automatic Transmission
+
Steering
+
Running gear
+
14. Forward suspension bracket
+
15. Drive of forward wheels
+
16. Back suspension bracket
+
Brake system
+
Body
+
Heating, ventilation
+
Electric equipment
2.10. Pulley of a cranked shaft
To remove or disconnect
PERFORMANCE ORDER
1.
Negative wire of the storage battery.
2.
To weaken fastening of the generator and to release a driving belt.
3.
To weaken fastening of the compressor of the conditioner and to release a driving belt.
4.
To unscrew a bolt of 144 fastenings of a pulley.
To establish or attach
PERFORMANCE ORDER
1.
A pulley on a shaft of a cranked shaft.
2.
To tighten a bolt the moment of 55 Nanometers.
3.
To establish a belt on a generator pulley.
4.
To establish a belt on a compressor pulley.
5.
Negative wire of the storage battery.
