Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
- Steering
   12.2. General description
   12.3. Reechny steering mechanism assembled
   12.4. Tips of steering drafts
   12.5. Steering drafts
   12.6. Casing of a case of the steering mechanism
   12.7. Coupling of a steering shaft
   12.8. Sealing cover of an opening of a forward board of the Body
   12.9. Plunzher of a lath
   12.10. Shaft gear wheel
   12.11. Lath
   12.12. Needle bearing
   12.13. The directing plug of a lath
   12.14. Verification of the neutral provision of a lath
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added working liquid
   12.17. Air removal from hydrosystem
   12.18. The steering mechanism with the hydraulic booster assembled
   12.19. Hoses and pipelines
   12.20. Tank
   12.21. Tips of steering drafts
   12.22. Steering drafts
   12.23. Plugs of hinges of steering drafts
   12.24. Coupling of a steering shaft
   12.25. Sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring of a plunzher
   12.28. Consolidations of a shaft of the hydrodistributor and top bearing
   12.29. Steering mechanism
   12.30. Verification of the neutral provision of a lath
   12.31. Belt of a drive of the pump
   12.32. Pulley of a drive of the pump
   12.33. Pump assembled
   12.34. Control levers on a steering column
   12.35. Steering wheel
   12.36. Ignition lock
   12.37. Steering column
   12.38. Lever switch, steering shaft, steering column (noncontrollable)
   12.39. Lever switch, steering shaft, steering column (adjustable)
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b Ремонт рулевого туарег смотри здесь.



12.5. Steering drafts

To remove or disconnect

Dismantle of steering draft



(ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
AND. THE PROVISION OF CUTS ON THE FIXING PLATE AT INSTALLATION
CENTURY. WRENCH
PAGE. FOR SIMPLIFICATION OF INSTALLATION TO APPLY A THIN FILM KONSISTENTNA OF GREASING ON THE PLUG

(ONLY FOR CARS WITH THE MANUAL TRANSMISSION)
23. STEERING DRAUGHT (LEFT)
21. THE FIXING PLATE
25. BOLT
26. THE BASIC PLATE (ONLY FOR CARS WITH THE MANUAL TRANSMISSION)
27. PLUG OF THE HINGE OF STEERING DRAUGHT
30. WASHER
32. CASE CASING
33. THE STEERING DAMPER (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)


PERFORMANCE ORDER
1. Fixing plate 24.
2. Coupling bolt 22.
3. Bolt of the 25th fastening of the internal hinge of steering draft.
Prevention

At simultaneous dismantle of both steering drafts it is necessary after removal of the first draft, to screw into place a bolt 25 to keep the mutual provision of a lath, a casing and directing level.


4. To deduce a head of steering draft from under a basic plate and to remove draft.

To establish or attach

PERFORMANCE ORDER
1. To check, that washers 30 were inserted into a casing 32.
2. Steering draft.
3. To screw a bolt 25. Bolts of fastening of steering bent for to a lath рулевoгo mechanism moment of 90 Nanometers.
4. To screw a coupling bolt 22. To tighten a bolt of klemmovy connection of steering draft the moment of 22 Nanometers.
5. A new fixing plate.