Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
- Steering
   12.2. General description
   12.3. Reechny steering mechanism assembled
   12.4. Tips of steering drafts
   12.5. Steering drafts
   12.6. Casing of a case of the steering mechanism
   12.7. Coupling of a steering shaft
   12.8. Sealing cover of an opening of a forward board of the Body
   12.9. Plunzher of a lath
   12.10. Shaft gear wheel
   12.11. Lath
   12.12. Needle bearing
   12.13. The directing plug of a lath
   12.14. Verification of the neutral provision of a lath
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added working liquid
   12.17. Air removal from hydrosystem
   12.18. The steering mechanism with the hydraulic booster assembled
   12.19. Hoses and pipelines
   12.20. Tank
   12.21. Tips of steering drafts
   12.22. Steering drafts
   12.23. Plugs of hinges of steering drafts
   12.24. Coupling of a steering shaft
   12.25. Sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring of a plunzher
   12.28. Consolidations of a shaft of the hydrodistributor and top bearing
   12.29. Steering mechanism
   12.30. Verification of the neutral provision of a lath
   12.31. Belt of a drive of the pump
   12.32. Pulley of a drive of the pump
   12.33. Pump assembled
   12.34. Control levers on a steering column
   12.35. Steering wheel
   12.36. Ignition lock
   12.37. Steering column
   12.38. Lever switch, steering shaft, steering column (noncontrollable)
   12.39. Lever switch, steering shaft, steering column (adjustable)
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b Кросс докинг что это в логистике по материалам www.gt-tech.ru.
Купить пеноплекс на сайте www.stroymoll33.ru.



12.34. Control levers on a steering column

GENERAL INFORMATION

Casings of a steering column

AND. STEERING WHEEL
CENTURY. TOP AND BOTTOM CASINGS OF THE STEERING COLUMN

Clamps of the switch of indexes of turn

AND. STEERING WHEEL
CENTURY. THE CLAMP PAD (TO PRESS DOWN FOR SWITCH REMOVAL)
PAGE. CONTROL LEVER TURN INDEXES

To remove or disconnect

PERFORMANCE ORDER
1. Negative wire of the storage battery.
2. Bottom overlay of a control panel.
3. To turn out screws from the top casing of the ruleny column, located on either side of from a steering column. For ensuring access to screws it is necessary to turn a steering wheel on 90 degrees плево or to the right.
4. To turn out 3 screws from the bottom casing of a steering column. To remove the handle from the lever of fixing of a steering column and to unscrew the lever of the mechanism of adjustment of a tilt angle of a steering column (at its existence on the car).
5. To press the fixing pads located from two parties of the switch, and to remove the lever together with the switch from a steering column.

To establish or attach

PERFORMANCE ORDER
1. To attach the electric socket to the switch and to establish it on a steering column.
2. The top and bottom casings on a steering column.
3. The lever of fixing of a steering column and the lever of the mechanism of adjustment of a tilt angle of a steering column (at their existence).
4. Bottom overlay of a control panel.
5. Negative wire of the storage battery.