Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
- Steering
12.2. General description
12.3. Reechny steering mechanism assembled
12.4. Tips of steering drafts
12.5. Steering drafts
12.6. Casing of a case of the steering mechanism
12.7. Coupling of a steering shaft
12.8. Sealing cover of an opening of a forward board of the Body
12.9. Plunzher of a lath
12.10. Shaft gear wheel
12.11. Lath
12.12. Needle bearing
12.13. The directing plug of a lath
12.14. Verification of the neutral provision of a lath
12.15. Recommendations about replacement of consolidations in the hydraulic booster
12.16. Check of level and having added working liquid
12.17. Air removal from hydrosystem
12.18. The steering mechanism with the hydraulic booster assembled
12.19. Hoses and pipelines
12.20. Tank
12.21. Tips of steering drafts
12.22. Steering drafts
12.23. Plugs of hinges of steering drafts
12.24. Coupling of a steering shaft
12.25. Sealing cover
12.26. Hydrocylinder pipelines
12.27. Adjustment of a preliminary tightness of a spring of a plunzher
12.28. Consolidations of a shaft of the hydrodistributor and top bearing
12.29. Steering mechanism
12.30. Verification of the neutral provision of a lath
12.31. Belt of a drive of the pump
12.32. Pulley of a drive of the pump
12.33. Pump assembled
12.34. Control levers on a steering column
12.35. Steering wheel
12.36. Ignition lock
12.37. Steering column
12.38. Lever switch, steering shaft, steering column (noncontrollable)
12.39. Lever switch, steering shaft, steering column (adjustable)
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment
|
Tip of steering draft
|
|
AND. IDENTICAL DISTANCES
CENTURY. ROTARY LEVER OF THE RACK OF THE SUSPENSION BRACKET
30. ADJUSTING SCREW
31. TIP OF STEERING DRAUGHT (LEFT)
33. NUT
34. COUPLING BOLT
35. STEERING DRAUGHT (LEFT) |
To remove or disconnect
| PERFORMANCE ORDER |
| 1. To unscrew a nut of a spherical finger. |
| 2. To weaken an inhaling of bolts 34. |
| 3. By means of stripper KM-507В to disconnect a tip 31 or 41 with a spherical finger from the corresponding rotary lever of a rack of a forward suspension bracket. |
| 4. To remove a tip 31 or 41 from the adjusting screw 30. |
|
To establish or attach
| PERFORMANCE ORDER |
| 1. To screw a tip 31 or 41 on the adjusting screw 30. |
| 2. To attach a spherical finger of a tip to the rotary lever. |
| 3. To screw a nut 33 on a spherical finger. To tighten a nut of a spherical finger of steering draft the moment of 60-75 Nanometers. |
|
To adjust
| PERFORMANCE ORDER |
| 1. To adjust a convergence of forward wheels, rotation of the adjusting screw 30. |
| 2. To tighten a bolt of klemmovy connection of steering draft the moment of 22 Nanometers. |
|
|
|
