Daewoo Nexia

since 1994 of release

Repair and car operation

In the steering hydraulic booster the rotor hydraulic distributor which operates switching of highways is used. At turn of a steering wheel in this or that party, the distributor connects to the delivery highway of the pump one of cavities of the hydrocylinder and at the same time other cavity – with plums. The piston of the hydrocylinder is fixed on a rod which is continuation of a gear lath. The piston will transform a difference of pressure of working liquid to force which moves a lath to the left and to the right and through steering drafts and levers turns operated wheels of the car. At failure of the steering amplifier possibility of driving remains, but efforts on a steering wheel increase. Rotation of a steering wheel is transferred by steering shaft to a shaft gear wheel which is in gearing with a lath. The steering mechanism will transform a rotary motion of a shaft gear wheel to forward moving of a lath. In hydrosystem of the steering amplifier the lopastny pump is used.

The protective cover, directing level of a lath, a plunzher of a lath and the hydraulic distributor will not enclose to repair in operation and are replaced assembled with the steering mechanism.

The pump of hydrosystem is supplied with a separate tank for working liquid. Protect the telny valve which has been built in a regulator of an expense, limits limiting value of pressure of forcing of the pump.

The steering column of the car has the following features of a design:

– the power absorbing device which improves passive safety of the car. At a head-on collision of the car the steering column is deformed in the longitudinal direction, absorbing energy of blow. It reduces probability of a travmirovaniye of the driver;
– in a steering column the ignition lock is put;
– the mechanical lock built in a steering column can block inclusion of ignition and turn of a steering shaft. The lock is the anti-theft device. On a steering column governing bodies (levers) are also mounted by turn indexes, head headlights, a smyvatel and a windscreen cleaner.

The steering column can be easily dismantled and is again established on the car.

For correct функциони a rovaniye of the power absorbing device of a steering column important that only such fixing details (screws, bolts and nuts were used) which are provided by a column design. Besides, all carving connections of a steering colony should be tightened by the moment of the demanded size. At assembly and installation of a steering column it is necessary to grease all knots of a friction with konsistentny lithium greasing. At the address with the steering column dismantled from the car it is necessary to show care. Plastic fixing details with which provide rigidity of a steering column, can be cut off or weakened when using not recommended strippers of a steering wheel, from strong blows on the helmsman палу, the appendix of the bending moment or when falling a steering column.