Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
- Steering
   12.2. General description
   12.3. Reechny steering mechanism assembled
   12.4. Tips of steering drafts
   12.5. Steering drafts
   12.6. Casing of a case of the steering mechanism
   12.7. Coupling of a steering shaft
   12.8. Sealing cover of an opening of a forward board of the Body
   12.9. Plunzher of a lath
   12.10. Shaft gear wheel
   12.11. Lath
   12.12. Needle bearing
   12.13. The directing plug of a lath
   12.14. Verification of the neutral provision of a lath
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added working liquid
   12.17. Air removal from hydrosystem
   12.18. The steering mechanism with the hydraulic booster assembled
   12.19. Hoses and pipelines
   12.20. Tank
   12.21. Tips of steering drafts
   12.22. Steering drafts
   12.23. Plugs of hinges of steering drafts
   12.24. Coupling of a steering shaft
   12.25. Sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring of a plunzher
   12.28. Consolidations of a shaft of the hydrodistributor and top bearing
   12.29. Steering mechanism
   12.30. Verification of the neutral provision of a lath
   12.31. Belt of a drive of the pump
   12.32. Pulley of a drive of the pump
   12.33. Pump assembled
   12.34. Control levers on a steering column
   12.35. Steering wheel
   12.36. Ignition lock
   12.37. Steering column
   12.38. Lever switch, steering shaft, steering column (noncontrollable)
   12.39. Lever switch, steering shaft, steering column (adjustable)
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

12.33. Pump assembled

GENERAL INFORMATION

Pump of the steering hydraulic booster

1. SPRING RING
2. COVER
3. SEALING RING
4. STATOR OF THE PUMP
5. PUMP ROTOR
6. BLADES (10 PIECES)
7. ADJUSTING PIN (2 PIECES)
8. DISTRIBUTIVE COVER
9. CLAMPING SPRING
10. PLUG

11. PUMP CASE
12. ABSORPTION BRANCH PIPE
13. SHAFT CONSOLIDATION
14. PUMP SHAFT
15. BALL BEARING
16. SPRING RING
17. THE UNION (WITH THE SEALING RING)
18. VALVE ASSEMBLED
19. SPRING
20. ADJUSTING PIN

To remove or disconnect

PERFORMANCE ORDER

1. Belt.

2. To turn out 3 bolts and to remove a pump pulley.

3. To disconnect pipelines (delivery and absorptions) from the pump.

4. To unfasten 9 clips and to remove the top cover of a belt of the distributive mechanism.

5. Pump.

6. To remove from the pump a nave.

To establish or attach

PERFORMANCE ORDER

1. To establish on the pump a nave.

2. Pump. To tighten bolts of fastening of the pump the moment of 25 Nanometers.

3. To attach pipelines (delivery and absorptions) to the pump.

4. A pulley to screw 3 bolts. To tighten bolts of fastening of a pulley of the pump the moment of 27 Nanometers.

5. Belt of a drive of the pump.

6. To fill in in system new working liquid.

7. To remove from hydrosystem of the steering amplifier air.

To check

PERFORMANCE ORDER

Existence of leakages of working liquid. In the presence of leakages of liquid to eliminate a cause of defect and to remove air from hydrosystem.