Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
- Steering
   12.2. General description
   12.3. Reechny steering mechanism assembled
   12.4. Tips of steering drafts
   12.5. Steering drafts
   12.6. Casing of a case of the steering mechanism
   12.7. Coupling of a steering shaft
   12.8. Sealing cover of an opening of a forward board of the Body
   12.9. Plunzher of a lath
   12.10. Shaft gear wheel
   12.11. Lath
   12.12. Needle bearing
   12.13. The directing plug of a lath
   12.14. Verification of the neutral provision of a lath
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added working liquid
   12.17. Air removal from hydrosystem
   12.18. The steering mechanism with the hydraulic booster assembled
   12.19. Hoses and pipelines
   12.20. Tank
   12.21. Tips of steering drafts
   12.22. Steering drafts
   12.23. Plugs of hinges of steering drafts
   12.24. Coupling of a steering shaft
   12.25. Sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring of a plunzher
   12.28. Consolidations of a shaft of the hydrodistributor and top bearing
   12.29. Steering mechanism
   12.30. Verification of the neutral provision of a lath
   12.31. Belt of a drive of the pump
   12.32. Pulley of a drive of the pump
   12.33. Pump assembled
   12.34. Control levers on a steering column
   12.35. Steering wheel
   12.36. Ignition lock
   12.37. Steering column
   12.38. Lever switch, steering shaft, steering column (noncontrollable)
   12.39. Lever switch, steering shaft, steering column (adjustable)
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



12.37. Steering column

GENERAL INFORMATION

Prevention

The steering column is subject to dismantle only in the following cases:

– the steering column demands replacement;
– the case for fastening of the lock of ignition and the blocking device of a steering shaft demands replacement;
– other cases of repair connected with removal from the car of a steering column.


To remove or disconnect

PERFORMANCE ORDER
1. Negative wire of the battery.
2. Control levers indexes of turns and screen wiper.
3. Electric conducting.
4. A flexible cable of the blocking device of the selector of ranges of a transmission and the ignition lock (only for cars with automatic transmission).
5. To establish a steering wheel in the neutral situation corresponding to rectilinear movement of the car.
6. To turn out a coupling bolt of klemmovy connection of the coupling of a steering shaft.
7. To turn out a bolt of fastening of an arm of a steering column to the dashboard.
8. Sreznye of a plate under the dashboard.
8а. Накернить head of the left srezny bolt.
8б. To drill an opening a special drill for extraction of bolts (diameter of a drill 1/8" – 3,175 mm).
8в. To insert into the drilled opening the N1411 adaptation for removal of bolts and to turn out srezny a bolt.
9. To remove a steering column and carefully to put on support.

To establish or attach

Installation of a steering shaft

AND. CASING OF THE STEERING COLUMN
CENTURY. STEERING SHAFT
PAGE. THE ALIGNING PLUG
D. COUPLING BOLT OF THE COUPLING

Installation of a srezny bolt of a steering column

AND. BOLT SREZNOGO'S WASHER
V. SREZNA BOLT
PAGE. ARM OF THE CASING OF THE STEERING COLUMN

PERFORMANCE ORDER
1. To turn a steering wheel so that spokes were symmetrized concerning a vertical and were directed down (the provision of a steering wheel for rectilinear movement of the car).
2. To establish aligning plug in a casing of a steering column.
3. To establish a lath of the steering mechanism in the average situation corresponding to rectilinear movement of the car.
4. To turn the coupling of a steering shaft so that the opening axis for a coupling bolt settled down horizontally and from above in bulk.
5. Carefully to insert a shaft of a steering shaft into a coupling opening.
Prevention

It is necessary to support a steering column until it will not be fixed by a srezny bolt. It is forbidden to leave a steering column without a support.


6. To establish (without tightening) the following fixing details:
      – srezny plates on the dashboard;
      – a bolt of fastening of an arm of a casing of a steering column to the dashboard. To tighten a bolt of fastening of an arm of a steering column to the dashboard the moment of 22 Nanometers;
      – a coupling bolt of klemmovy connection of the coupling with steering shaft. (The bolt should be inserted into a smooth opening without a carving). To tighten srezny a bolt located to the left of a steering column, the moment of the demanded size;
      – new самоконтрящуюся a nut (with a washer), located to the right of steering колот and the moment of the demanded size.
7. To extend a steering shaft up (against the stop the ball bearing of a shaft). To tighten a coupling bolt klemmovy connection of the coupling of a steering shaft by the moment of 25 Nanometers.
8. To take out directing plug from a column casing, having left it on the helmsman to a shaft.
9. To attach electroconducting.
10. To attach a cable of a drive of the blocking device of the lock of ignition and the transmission selector (only for cars with automatic transmission).
11. To establish control levers indexes of turn and a screen wiper.
12. To check installation of operated wheels in situation for rectilinear movement.
13. Negative wire of the battery.