Daewoo Nexia

since 1994 of release

Repair and car operation


Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
- 3. Engine (two top camshafts)
   3.2. General description
   3.3. Operation of hydraulic jacks of gaps
   3.4. Greasing system
   3.5. Maintenance and repair
   3.6. Compression check
   3.7. Dismantle and engine installation assembled
   3.8. Maple belt
   3.9. Engine support
   3.10. Inlet collector and laying
   3.11. Final collector and laying
   3.12. Cover of the klapanny mechanism and laying
   3.13. Pulley of a cranked shaft
   3.14. Forward cover of a gear belt
   3.15. Gear belt
   3.16. Natyazhitel of a gear belt
   3.17. Camshaft cogwheel
   3.18. Cogwheel of a cranked shaft
   3.19. Back cover of a gear belt
   3.20. Forward consolidation of a cranked shaft
   3.21. Camshaft. Hydrojacks of gaps of valves
   3.22. Head of the block of cylinders
   3.23. Repair of a head of the block of cylinders
   3.24. Klapannye of a spring. Consolidations of cores of valves
   3.25. Dismantle of valves
   3.26. Directing plugs of valves
   3.27. Expansion of openings of plugs
   3.28. Valves
   3.29. Klapannye of a spring
   3.30. Saddles of valves
   3.31. Oil pallet
   3.32. A reception branch pipe with the oil filter
   3.33. Oil pump
   3.34. Repair of the oil pump
   3.35. Pistons and rods
   3.36. Flywheel. Back consolidation of a cranked shaft
   3.37. Cranked shaft
   3.38. Rods and radical bearings
   3.39. Replacement of loose leaves
   3.40. Piston fingers and rings
   3.41. Block of cylinders
   3.42. Installation of pistons
   3.43. Disk balancing with a gear wreath
   3.44. Repair of carving openings
   3.45. Diagnostics of malfunctions
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



3.17. Camshaft cogwheel
GENERAL INFORMATION

Dismantle of a cogwheel of a cam-shaft

 

To remove or disconnect

PERFORMANCE ORDER
1. Negative wire of the storage battery.
2. A ventilating hose from a cover of the klapanny mechanism and electric plugs (see fig. Branch pipe of an air purifier and electric sockets).
3. Air purifier.
4. Driving maple belts of the generator and conditioner compressor.
5. A pulley of the pump of the steering amplifier (see fig. Dismantle of a pulley of the pump of the steering amplifier).
6. Forward cover 73 gear belts.
7. Cover 7 klapanny mechanisms.
8. Holding a wrench a cam-shaft 19 from rotation, to unscrew a bolt 65 and to remove a wheel 63.

To establish or attach

PERFORMANCE ORDER
1. Both cogwheels 63 on cam-shafts 19. To wrap bolts 65.
2. To tighten a bolt of fastening of a cogwheel the moment of 67 Nanometers.
3. Cover 7 klapanny mechanisms.
4. Forward cover 73 gear belts and pulley of the pump of the steering amplifier.
5. Driving maple belts of the generator and conditioner compressor.
6. Air purifier.
7. A ventilating hose to a cover of the klapanny mechanism and electric plugs.
8. Negative wire of the storage battery.