Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
- 3. Engine (two top camshafts)
   3.2. General description
   3.3. Operation of hydraulic jacks of gaps
   3.4. Greasing system
   3.5. Maintenance and repair
   3.6. Compression check
   3.7. Dismantle and engine installation assembled
   3.8. Maple belt
   3.9. Engine support
   3.10. Inlet collector and laying
   3.11. Final collector and laying
   3.12. Cover of the klapanny mechanism and laying
   3.13. Pulley of a cranked shaft
   3.14. Forward cover of a gear belt
   3.15. Gear belt
   3.16. Natyazhitel of a gear belt
   3.17. Camshaft cogwheel
   3.18. Cogwheel of a cranked shaft
   3.19. Back cover of a gear belt
   3.20. Forward consolidation of a cranked shaft
   3.21. Camshaft. Hydrojacks of gaps of valves
   3.22. Head of the block of cylinders
   3.23. Repair of a head of the block of cylinders
   3.24. Klapannye of a spring. Consolidations of cores of valves
   3.25. Dismantle of valves
   3.26. Directing plugs of valves
   3.27. Expansion of openings of plugs
   3.28. Valves
   3.29. Klapannye of a spring
   3.30. Saddles of valves
   3.31. Oil pallet
   3.32. A reception branch pipe with the oil filter
   3.33. Oil pump
   3.34. Repair of the oil pump
   3.35. Pistons and rods
   3.36. Flywheel. Back consolidation of a cranked shaft
   3.37. Cranked shaft
   3.38. Rods and radical bearings
   3.39. Replacement of loose leaves
   3.40. Piston fingers and rings
   3.41. Block of cylinders
   3.42. Installation of pistons
   3.43. Disk balancing with a gear wreath
   3.44. Repair of carving openings
   3.45. Diagnostics of malfunctions
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

3.12. Cover of the klapanny mechanism and laying

GENERAL INFORMATION

Hose of ventilation of a case

Cover of the klapanny mechanism and laying

Installation of laying of a cover of the klapanny mechanism and sealing rings

Installation of a cover of the klapanny mechanism

To remove or disconnect

PERFORMANCE ORDER

1. Ventilating hoses With and In from branch pipes on a cover of the klapanny mechanism, the case of a butterfly valve and the pipeline of a vozdukhochistitel (see fig. Branch pipe of an air purifier and electric sockets).

2. A collar 179, a hose of the 180th ventilation of a case from a cover 7.

3. To unscrew four bolts 8 and to uncover 1 spark plugs a cover of the klapanny mechanism.

4. Tips of spark plugs, then, having unscrewed bolts 9, a cover 7 and laying 15. Condensed surfaces of a cover of the klapanny mechanism and a head of cylinders.

To establish or attach

PERFORMANCE ORDER

1. To check correctness of installation of sealing rings And in openings for spark plugs.

2. Laying on a cover of the klapanny mechanism.

Prevention

To check correctness of installation in a flute of semicircular rubber laying of consolidation of the case of the distributor of ignition.

3. A cover 7 with laying 15 on a head of cylinders to screw in bolts 9. To tighten bolts of a cover klapanny механиз ма the moment of 8 Nanometers.

4. Tips and wires of a high voltage on spark plugs (observing an operating procedure of cylinders).

5. A cover of 1 spark plugs to screw in bolts 8.

6. A hose of the 180th ventilation of a case to a cover 7 to tighten a collar 179.

7. Ventilating hoses With and In to branch pipes on a cover of the klapanny mechanism, the case of a butterfly valve and the pipeline of a vozdukhochistitel (see fig. Branch pipe of an air purifier and electric sockets).