Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
- Heating, ventilation
   19.2. Air central air
   19.3. Diagnostics of malfunctions
   19.4. Features of the conditioner
   19.5. Work of central air of air
   + 19.6. Management of air central air
   19.7. Relay and switches
   + 19.8. Diagnostics of malfunctions
   - 19.9. Maintenance
      19.9.1. Replacement of sealing rings
      19.9.2. Corrected addresses with a coolant
      19.9.3. Rules of installation of connections of pipelines
      19.9.4. Ensuring chemical purity of a coolant and refrigerating oil
      19.9.5. A discharge, having added oils, air pumping, the KV system charging a coolant
      19.9.6. Filter-vlagopoglotitelya installation
      19.9.7. Receiver maintenance
   + 19.10. Removal and installation of knots of central air of air
   19.11. The V-5 compressor – the work description
+ Electric equipment


19.9.2. Corrected addresses with a coolant


Working body in KB system is the coolant representing a chemical mix which represents health hazard and demands observance of certain rules of the address. At the work, connected with KB system depressurization, it is necessary to use always goggles and to wrap up shtutserny connections and valves a pure fabric. All works with KB system are necessary for carrying out in well airing megohm a room and to avoid coolant steam inhalation. It is forbidden to make welding or processing by steam of any pipelines and KB system knots without preliminary dismantle from the car. At contact of a coolant to open sites of a body it is necessary to wash out these sites a water stream. The coolant is transported and stored in capacities with the strong metal screw covers protecting from damages the valve and a safety stopper. It is recommended to establish a cover into place after each use of capacity. It is forbidden to transport capacities with a coolant in passenger office of the car.