Daewoo Nexia

since 1994 of release

Repair and car operation


Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
- Body
   18.2. Identification and use of keys
   18.3. Pasted lateral moldings
   18.4. Diagnostics and repair of a leakage of the Body
   18.5. Anticorrosive processing
   + 18.6. Dismantle of consolidations of wind and back glasses
   - 18.7. Windscreen
      18.7.2. Complete replacement of a glutinous fringing of a window aperture
   + 18.8. Back glass (Body sedan)
   18.9. Glass of a back door (Body hatch-back)
   18.10. Triangular lateral glass
   + 18.11. Elimination of a leakage of consolidations
   + 18.12. Rear-view mirror
   + 18.13. Electroheater of back glass
   + 18.14. Bumpers
   18.15. External ventilating lattice
   18.16. Switch of a forward door
   18.17. Cowl
   18.18. Cowl loops
   18.19. Cowl emphasis
   18.20. Locking device of a cowl
   18.21. Safety latch of a cowl
   18.22. Cable of a latch of a cowl
   18.23. Front grille
   18.24. Forward wing
   + 18.25. Panels of an upholstery of doors
   + 18.26. Equipment of doors (lobbies and back doors)
   + 18.27. Door locks
   + 18.28. Glasses of doors
   18.29. External rear-view mirrors
   18.30. Dismantle and installation of lobbies and back doors
   + 18.31. Back panels of an upholstery (Body hatch-back)
   + 18.32. Upholstery panels (Body sedan)
   18.33. External panel
   18.34. Ventilating valve (Body hatch-back)
   18.35. Hatch of a mouth of a fuel tank
   + 18.36. Opening window leaves (A body a hatch-back)
   + 18.37. Back shelf (Body sedan)
   18.38. Cover of a luggage compartment (Body hatch-back)
   18.39. Overlay of a back wall of a luggage carrier (Body sedan)
   + 18.40. Trunk lid (Body sedan)
   18.41. The back combined lamp
   + 18.42. Back door (Body hatch-back)
   18.43. Roof
   18.44. Ceiling panel
   18.45. Antisolar peaks
   18.46. Plafond of internal lighting
   + 18.47. Panels and salon equipment
   18.48. External longitudinal overlays of a roof
   + 18.49. Ventilating hatch
   + 18.50. Forward seats
   + 18.51. Back seat
+ Heating, ventilation
+ Electric equipment


8128da4b



18.7. Windscreen

18.7.1. Partial replacement of a glutinous fringing
GENERAL INFORMATION

Rotary finger and windscreen emphasis

1. WINDSCREEN EMPHASIS
2. ROTARY FINGER

To remove or disconnect

Dismantle of a rotary finger

1. ROLLER OF THE LEVER OF THE SCREEN WIPER
2. WINDSCREEN
3. ROTARY FINGER
4. WINDSCREEN EMPHASIS

Windscreen dismantle

1. STRING

PERFORMANCE ORDER
1. Levers of a screen wiper and external ventilating lattice.
1а. To remove plastic caps from rollers of levers of a screen wiper.
1б. To unscrew nuts and to remove screen wiper levers from shlitsevy shafts of rollers.
1в. To turn out three screws and to remove a ventilating lattice.
2. The bottom rotary fingers and a windscreen emphasis (on one from each party of the car).
3. Internal rear-view mirror.
4. A sealant and a cord from a forward rack.
5. Right and left decorative moldings of a windscreen. By means of a knife for removal of a sealant to make an incision the parties and sealant top as it is possible closer to a glass edge. To insert outside a string between glass and the Body and by means of the second mechanic to cut off a glutinous layer on the bottom edge of glass.
6. A windscreen from the car.
7. Bottom decorative strip of a windscreen.

To clear

PERFORMANCE ORDER
1. I will eat windows from the remains of all materials.
2. Glass on edge perimeter for the subsequent drawing of preparatory layers.
3. To wipe a windscreen the pure fabric moistened in alcohol.

To establish or attach

Drawing on a windscreen of priming structure

1. NEW BRUSH
2. STRUCTURE FOR DRAWING OF THE PRIMING COAT

Drawing of pressurizing structure

Thickness of the roller of glutinous structure – 5 mm.

Windscreen installation

1. BACK GLASS
2. EMPHASIS OF BACK GLASS

PERFORMANCE ORDER
1. The bottom emphasis of a windscreen the flat party turned up. To establish a rotary finger.
2. By means of a new brush to put on glass edge preparatory layers, using the relevant structures from a repair set. At first it is necessary to put a priming coat from transparent structure, and then from structure of black color. Priming coats put on perimeter of an edge of glass. Priming put on perimeter of an edge of glass with a strip in width of 6 mm.
3. Top, lateral and bottom moldings on a windscreen edge.
4. On perimeter of an edge of a window aperture to put uretanovy glutinous structure in the form of the roller in thickness of 5 mm (fig. Drawing of pressurizing structure).
5. By means of the second mechanic to establish a windscreen on the car. Stsentriro вать glass in the Body aperture. Use of rubber suckers can facilitate windscreen installation (fig. Windscreen installation).
6. To turn a windscreen emphasis clockwise so that flat parts of an emphasis appeared in the bottom situation.
7. To check tightness of consolidation of a windscreen, watering it. At detection of a leakage it is necessary to dry glass and in addition to impose pressurizing structure. If it was not possible to eliminate a leak, it is necessary to remove glass and to repeat all installation anew.
8. Levers of screen wipers and external ventilating lattice.
8а. To establish into place a ventilating lattice and to fix it three screws.
8б. To establish levers of screen wipers on shlitsevy rollers.
8в. To screw nuts of fastening of levers.
9. Internal rear-view mirror.
10. A sealant and a cord on a forward pile.
11. Right and left decorative moldings of a windscreen.