Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
- 14. Forward suspension bracket
   14.2. General description
   14.3. Check of size of forces of a friction in a suspension bracket
   14.4. Check of a condition of bearing support and spherical hinges
   14.5. Stabilizer
   14.6. A rack assembled with a bearing support
   14.7. Bottom lever
   14.8. Spherical hinge
   14.9. Nave and wheel bearing
   14.10. Top support
   14.11. Springs
   14.12. Shock-absorber
   14.13. Plugs of hinges of the bottom lever
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

14.5. Stabilizer

GENERAL INFORMATION

Stabilizer fastening

20. RASPORNY PLUG
25. COLLAR
27. STABILIZER
30. NUT

Stabilizer rack

8. BOLT
13. BOTTOM LEVER
30. NUT

To remove or disconnect

PERFORMANCE ORDER

1. To release bolts of fastening of forward wheels.

2. To lift the car and to hang out forward wheels.

3. To remove forward wheels.

4. To unscrew a nut 30, to remove details 29, the 28th fastenings of the stabilizer to the bottom lever 13.

5. To remove a collar 25 and the plug 26.

6. To remove the stabilizer 27.

To establish or attach

PERFORMANCE ORDER

1. Stabilizer 27, plug 26 and collar 25.

2. To screw bolts 24, without tightening them it is final, and to level position of the stabilizer. To tighten bolts 24 in the static provision of a suspension bracket.

3. The stabilizer 27 to the bottom lever 13. At assembly to use a new being self-stopped nut 30. To tighten a nut 30 for compression of a package of rubber plugs to height In (see fig. Stabilizer rack).

4. Forward wheels.

5. To tighten bolts of 24 fastenings of the stabilizer to the Body the moment of 40 Nanometers.

6. To tighten nuts of the 30th fastening of the stabilizer to the bottom lever for compression of a package of rubber plugs to height In (see fig. Stabilizer rack).

7. To lower the car.

8. To tighten bolts of fastening of wheels the moment of 90 Nanometers.