| 1. Together with the assistant to undertake hands a front bumper and to lift a car front, probably, above. Smoothly and slowly to lower the car until it will not come to position of static balance. |
| 2. To measure distance down from a floor to the bumper middle. |
| 3. To press a bumper from above and to lower a car front, possibly below. Then, smoothly and slowly reducing effort, to give the chance to the car to come to position of static balance. |
| 4. To measure distance down from a floor to the bumper middle. At a normal friction in a suspension bracket a difference between two результа weary measurements should not exceed 12,7 mm. If the difference exceeds this value, it is necessary to check a condition of support of the bottom levers, telescopic racks and spherical hinges. |
|
