Daewoo Nexia

since 1994 of release

Repair and car operation


Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
- 10. Five-speed transmission and main RPO MM5 broadcast
   10.2. General description
   10.3. Diagnostics of malfunctions
   10.4. The possible reasons of the increased noise of a transmission
   10.5. Check of level of transmission oil
   10.6. Adjustment of a drive of the mechanism of switching
   10.7. Gear shifting lever
   10.8. Floor mechanism of management of a transmission
   10.9. Draft of the mechanism of management
   10.10. Intermediate lever
   10.11. Speedometer drive
   10.12. Cover of the mechanism of the switch
   10.13. Consolidations of semi-axes
   10.14. Transmissions assembled
   10.15. Dismantling of a transmission and main transfer
   10.16. Characteristic malfunctions of a transmission and possible reasons
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



10.8. Floor mechanism of management of a transmission
GENERAL INFORMATION

Hinge of the lever of switching

203. GEAR SHIFTING LEVER
204. THE LEVER AXIS WITH THE SPRING CLAMP
205. CROSSPIECE OF THE HINGE OF THE LEVER OF SWITCHING

Directing and assembly plugs

244. THE DIRECTING PLUG
245. ASSEMBLY PLUG

Case and roller of the mechanism of management of a transmission

209. CASE OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
241. ROLLER

To remove or disconnect

Axis dismantle with a spring clamp

204. THE LEVER AXIS WITH THE SPRING CLAMP

Console dismantle

AND. TO PULL BACK
CENTURY. SCREWS
PAGE. BACK PART OF THE CONSOLE

PERFORMANCE ORDER
1. Negative wire of the battery.
2. To weaken a bolt 210 klemmovy connections and to disconnect a tip 213 from the roller 241.
2а. To remove a cover 240.
3. Back part of the console.
4. To transfer the lever 203 to neutral situation.
5. Lever 203 and cover 202.
5а. To turn an axis 204 clamp on an arrow and to dismantle an axis from an opening levers.
6. Console completely.
7. To turn out bolts of the 208th fastening of a case.
8. Roller 241 and case 209.
8а. To take out the roller from a case.
9. To take out directing plug 244 and the assembly plug 245 of an opening of a case 209.
10. To take out the plug 244 of the plug 245.

To establish or attach

Installation of the roller of the mechanism of management by a transmission

209. CASE OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
210. BOLT
211. WASHER
240. COVER
241. ROLLER
244. THE DIRECTING PLUG
245. ASSEMBLY PLUG

Installation of plugs in a mechanism case

209. CASE OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
245. PLUG

PERFORMANCE ORDER
1. To insert the plug 244 into the plug 245.
2. To press the plug 245 in an opening of a case 209 from within.
3. To put in internal flutes of the plug 244 silicone greasing of brand 1052863 or equivalent.
4. To insert the roller 241 into a case 209 and in a plug 244 opening.
5. To establish into place a case 209 with the roller 241 and to screw bolts 208.
6. Console.
7. To establish the lever 203 in a crosspiece 205, to insert an axis with a clamp 204. To turn a clamp in initial situation.
8. Cover 240.
9. To insert a tip 213 into the roller 241.
10. To adjust a drive and position of the lever of switching. Then to tighten a bolt 210 klemmovy connections.
11. Central console.
12. Negative wire of the battery.