Daewoo Nexia

since 1994 of release

Repair and car operation


Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
- 10. Five-speed transmission and main RPO MM5 broadcast
   10.2. General description
   10.3. Diagnostics of malfunctions
   10.4. The possible reasons of the increased noise of a transmission
   10.5. Check of level of transmission oil
   10.6. Adjustment of a drive of the mechanism of switching
   10.7. Gear shifting lever
   10.8. Floor mechanism of management of a transmission
   10.9. Draft of the mechanism of management
   10.10. Intermediate lever
   10.11. Speedometer drive
   10.12. Cover of the mechanism of the switch
   10.13. Consolidations of semi-axes
   10.14. Transmissions assembled
   10.15. Dismantling of a transmission and main transfer
   10.16. Characteristic malfunctions of a transmission and possible reasons
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



10.10. Intermediate lever
GENERAL INFORMATION

Drive of the mechanism of switching

210. BOLT
211. WASHER
212. КЛЕММОВЫИ CLIP
213. THE ADJUSTING TIP WITH THE EYE
214. DRAUGHT
220. PLUG
223. AXIS CLAMP
224. THE ROLLER WITH THE FORK
237. HINGE AXIS
238. THE INTERMEDIATE ROLLER WITH THE LEVER
239. LEVER AXIS
241. ROLLER

Kardanny hinge of a drive of the mechanism of management

223. AXIS CLAMP
237. HINGE AXIS

Hinge of the intermediate lever

217. INTERMEDIATE LEVER
220. PLUG
239. LEVER AXIS

To remove or disconnect

PERFORMANCE ORDER
1. Negative wire of the battery.
2. Draft 214.
3. Clamp of 223 axes and axis 237 of the kardanny hinge.
4. To disconnect a bolt klemmovy connect a niya.
4а. To disconnect a tip 213 from the roller 214.
5. Axis 239 of the intermediate lever and spring clamp 221.
6. The intermediate lever 217, a tip 213 and the roller 238 with the lever.
7. Plugs 219 and 220.
8. Spring rings of hinges of the intermediate lever and to disconnect a tip 213 and the roller 238 lever.

To establish or attach

Installation of plugs of an axis of the intermediate lever

217. INTERMEDIATE LEVER
220. PLUG

PERFORMANCE ORDER
1. A tip 213 and the roller 238 lever to the intermediate lever 217.
1а. To establish spring rings of hinges.
2. To insert plugs 220 into the lever 217. Before installation to grease plugs with silicone greasing.
3. The intermediate lever on an axis 239. To check reliability of installation of a spring clamp.
4. A tip 213 on the roller 241.
5. Axis 237 of the kardanny hinge and spring clamp of 223 axes. Before installation to grease an axis with silicone greasing.
6. Draft 214.
7. To adjust a drive and to tighten a bolt 210 klemmovy connections.
8. Negative wire of the battery.