Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
- 10. Five-speed transmission and main RPO MM5 broadcast
   10.2. General description
   10.3. Diagnostics of malfunctions
   10.4. The possible reasons of the increased noise of a transmission
   10.5. Check of level of transmission oil
   10.6. Adjustment of a drive of the mechanism of switching
   10.7. Gear shifting lever
   10.8. Floor mechanism of management of a transmission
   10.9. Draft of the mechanism of management
   10.10. Intermediate lever
   10.11. Speedometer drive
   10.12. Cover of the mechanism of the switch
   10.13. Consolidations of semi-axes
   10.14. Transmissions assembled
   10.15. Dismantling of a transmission and main transfer
   10.16. Characteristic malfunctions of a transmission and possible reasons
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



10.13. Consolidations of semi-axes

GENERAL INFORMATION

Semi-axis consolidation

AND. HAMMER

To remove or disconnect

Necessary tools and adaptations:

– stripper KM-507В.

PERFORMANCE ORDER
1. Negative wire of the battery.
2. To lift the car and to fix properly.
3. Wheels.
4. Antisplash guards.
5. To disconnect the bottom spherical hinge.
6. To disconnect hinges of steering drafts.
7. To take out semi-axes from a case. Dismantle of semi-axes from transmission needs use of special adaptations.
8. To take out consolidations of semi-axes.

To establish or attach

PERFORMANCE ORDER
1. Consolidations of semi-axes by means of the assembly adaptation and a hammer. Before installation to grease, an edge of consolidation by pure transmission oil.
2. Semi-axes.
3. Bottom spherical hinge.
4. Hinges of steering drafts.
5. To check oil level in transmission. If necessary to add oil and to finish level to norm.
6. Antisplash guards.
7. Wheels.
8. To lower the car.
9. Negative wire of the battery.