Daewoo Nexia

since 1994 of release

Repair and car operation

Deu Neksiya
+ Maintenance instruction
- Maintenance
   1.2. General instructions on repair
   1.2. Identification number of the car
   1.3. Car lifting
   1.4. Car maintenance
   - 1.5. Control surveys and the servicing, carried out by the owner
      1.5.1. When driving car
      1.5.2. At each filling of fuel
      1.5.3. Monthly Maintenance
      1.5.4. The maintenance, carried out two times a year
      1.5.5. At each replacement of engine oil
      1.5.6. Annual Maintenance
   1.6. Moments of an inhaling of carving connections
   1.7. Car characteristics with system of multipoint injection of fuel
   1.8. Characteristics of cars (2 top camshafts of the engine)
   1.9. Sizes and mass of cars
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

1.5.5. At each replacement of engine oil

GENERAL INFORMATION

Oil level in an automatic transmission

Look subsection "Automatic Transmission".

Oil level in a transmission with manual switching

Check level of oil and if necessary finish it to norm, look the subsections "Coupling" and "A five-speed transmission and the main RPO MM5 broadcast".

Check of a condition of brake system

Shift of wheels combine with check of a technical condition of knots and details of brake system. Examine pipelines and hoses of a brake drive, check serviceability and tightness of connections, existence of cracks, traces of an istiraniye and other defects. Check wear of brake shoes of disk brake mechanisms and a condition of a surface of a friction of disks. Check also wear of blocks of drum-type brake mechanisms and existence of cracks on slips. At the same time examine both other details and knots of brake system: internal surface of brake drums, wheel cylinders, parking brake etc. Check adjustment of the parking brake. Check a condition of brake system more often if for operation of the car frequent braking are characteristic.

Check of a condition of a steering, suspension bracket, protective covers and consolidations of the leading bridge

Examine forward and back suspension brackets of wheels and the Steering about detection of defects and the operational damages which have been badly fixed or absent details, wear tracks or lack of greasing. Check a condition of pipelines and hoses of the steering hydraulic booster: reliability and tightness of connections, existence of cracks, traces of an istiraniye and other defects. Clear and check a condition of protective covers and consolidations of the leading bridge: existence of gaps and lubricant podtekaniye. If necessary replace faulty covers and consolidations.

Check of a condition of final system

Examine completely all final system, including catalytic converter of the fulfilled gases if it is established on the car. Examine places of the Body of the car, being in close proximity to details of final system. Check existence of defects and the operational damages of final system displaced or absent details, integrity of welded seams and the pipelines which have been badly tightened and leaky connection, and also other malfunctions which can lead to heating of the bottom of the Body or hit of the toxic fulfilled gases in passenger salon or a luggage carrier.

Check of a condition of a drive of a butterfly valve

Check freedom of movings of a drive, existence of the jammings damaged or absent details.
Grease with suitable greasing all hinges of a drive and a cable, a support of an intermediate axis of a zaslonka, a returnable spring of the valve of a zaslonka, knots of a friction of a pedal of an accelerator. Check freedom of movings of a cable of a zaslonka.

Belts of a drive of units

Check a condition of all belts of a drive of units: existence of cracks, wear tracks, stratifications. If necessary replace worn-out belts and adjust a tension of belts.

Work of a latch of a cowl

When opening a cowl check work of a safety latch. This latch should not allow to lift a cowl after the main lock was open. Be convinced that the cowl is closed densely.