Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
- 16. Back suspension bracket
   16.2. General description
   16.3. Maintenance and repair
   16.4. Check of size of forces of a friction in a suspension bracket
   16.5. Bearings of wheels
   16.6. Shock-absorber
   16.7. Stabilizer
   16.8. Springs
   16.9. Plugs of hinges of a back suspension bracket
   16.10. Back suspension bracket assembled
   16.11. Nave
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b Боулинг турбина цена.



16.4. Check of size of forces of a friction in a suspension bracket

PERFORMANCE ORDER
1. Together with the assistant to undertake hands a rear bumper and to lift a back part of the car possibly above. Smoothly and slowly to lower the car until it will not come to position of static balance.
2. To measure distance down from a floor to the bumper middle.
3. To press a bumper from above and to lower a back of the car possibly below. Then, smoothly and slowly reducing effort, to give the chance to the car to come to position of static balance.
4. To measure distance down from a floor to the bumper middle. At a normal friction in a suspension bracket the difference between two results of measurements should not exceed 12,7 mm. If the difference exceeds this value, it is necessary to check a condition of levers of a suspension bracket on existence of signs of wear or damages.