since 1994 of release
Repair and car operation
+ Maintenance instruction
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
- 8. Electronic control unit and sensors
- 8.2. Sensors
8.2.2. The air temperature sensor in an inlet collector (pipeline) (DTV)
8.2.3. The sensor of concentration of oxygen in the fulfilled gases (DKK)
8.2.4. Sensor of provision of a butterfly valve (DDZ)
8.2.5. The sensor of absolute pressure in the inlet pipeline (DAD)
+ 8.2.6. Sensor of speed of the car (DSA)
8.2.7. Sensor of inclusion of central air of air
8.2.8. Parking/neutral switch (an automatic transmission)
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Heating, ventilation
+ Electric equipment
In DTV the termistor which changes electric resistance depending on temperature is used. At low air temperature (–40 ° C) resistance of a termistor makes about 100 kiloohms, and at high temperature (130 ° C) – only 70 Ohm. EBU feeds DTV chain with constant basic tension through consistently included resistance. Tension of a signal of DTV is great, when air in an inlet collector cold, and decreases in process of air temperature increase. By tension of a signal of DTV EBU determines air temperature in an inlet collector.
The signal of DTV is used by EBU for regulation of a corner of an advancing of ignition when in the Engine cold air arrives.
At refusal of a chain of DTV EBU establishes a code of malfunction 23.
DTV is established on the air purifier case.
To establish or attach