Daewoo Nexia

since 1994 of release

Repair and car operation



Deu Neksiya
- Maintenance instruction
   + Combination of devices
   Switches and switches
   Switches and salon equipment
   Salon and Body equipment
   Ventilation, heating and salon conditioning
   - Car maintenance
      Engine oil
      Cooling liquid
      Transmission oil
      Working liquid of a hydraulic actuator of coupling
      Brake liquid
      Liquid of the hydraulic booster of a steering
      Air filter
      Belt of a drive of the generator
      Headlights of a driving and passing beam
      Forward dimensional lamps
      Forward lamps of indexes of turn
      Back lamps
      Lamp of illumination of registration plate
      Plafond of illumination of salon
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. Forward suspension bracket
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



Cooling liquid

GENERAL INFORMATION

In system of cooling of the engine low-freezing liquid on этиленгли to a kolevy basis is filled in. Cooling liquid of normal concentration possesses low temperature of freezing and high protective properties against corrosion of metal details of system of cooling of the engine and a heater. Therefore I cool Shuya liquid it is not necessary to replace with water even in the summer. On the cold engine level of cooling liquid should be between labels the MOVE and MIN on a wall of a broad tank. Level of cooling liquid in a broad tank raises at engine warming up to normal working temperature and again decreases when cooling engine. If level of cooling liquid fell in a broad tank below MIN label, add in a tank a mix of water and этиленглико the left liquid in a proportion 50/50 and finish level of cooling liquid to norm. It will provide preservation of low-subjects of peraturny and anticorrosive properties of cooling liquid at former level.

Periodicity of replacement of cooling liquid

Through 40000 km of run or 2 years of operation.

Refueling capacity

МРFI
6,2 l
   – antifreeze
3,1 l
   – water
3,1 l
DOHC
6,7 l
   – antifreeze
3,35 l
   – water
3,35 l

Prevention

At car operation during a winter season when air temperature long time keeps at level below–34 ° With, it is necessary to finish concentration of cooling liquid to a proportion 60/40 (concentrate/water).

Do not overflow a broad tank. For manufacturing of cooling liquid use only the "soft" (distilled) water. The block of cylinders and a head of the block of the engine are made of cast iron and an aluminum alloy respectively for which protection against corrosion it is necessary to use in cooling system liquid on an etilenglikolevy basis. It is forbidden to apply in cooling system spirit structures (including on the basis of methanol) or to mix them with recommended cooling liquid.

Avoid antifreeze hit in eyes or on open sites of skin. If it occurred, at once wash out the struck place a plentiful quantity of water and at emergence irritation address for medical care.



Engine overheat

If the index of temperature of cooling liquid signals about an overheat of the engine or about it tell any other signs, stop the car.

Switch off air central air. If from under a cowl steam rises, do not stand in close proximity to the car. Switch off the Engine. Then turn a key and include ignition, without starting the Engine. The fan which will start to cool a radiator thus will turn on.

After steam stopped from under a cowl, lift a cowl. Check level of cooling liquid. When falling level of cooling liquid check lack of traces of leakage of liquid through thinnesses in connections of hoses of a radiator, a heater, and also in the radiator and the water pump. If you found leakage of cooling liquid or other defects, do not maintain the Engine before elimination of all malfunctions.


Prevention

If level of cooling liquid quickly decreases and required to add often liquid in a broad tank, address in the service center for check of tightness of system of cooling of the engine.

Do not uncover a broad tank and a radiator on the hot engine. Splashes of boiling cooling liquid and steam, leaving under pressure from under a cover can lead to serious burns.